Kit CNMG + PCLNR holder

Standard turning holder PCLNR 2525M12 and 10pc turning inserts CNMG 120412

HOLDER DESCRIPTION

PCLNR 2525M12 standard turning holder for inserts CN.. 1204

P - Method of clamping insert in to holder, with a level (knee shaped) from underneath through insert, turning iserts have bore through.

C -Quadrilateral shape of turnining insert meant to be clamped into holder - rhombic (80°)

L - approach angle (95°) Angle under which the insert is attached to the holder (95°) relative to the workpiece axis

N - Tool is meant for Inserts with clearance angle (0°) under main cutting edge

R - Orientation of the turning tool is right

25 - Height of tool holder

25 - Width of tool holder

M - Length of the holder 150mm

12 -The length of the cutting edge on the turning insert intended for clamping into this holder 12,9mm

• Material:
  • Hardened steel
    
  • Black oxide coating
• Colour:
  • black with laser mark of tool code
• Included:
  
  • Level (knee shaped)
  • Screw
  • Spring
  • Shim/pad
  • Key
• Packaging:
  • Colour plastic box
• Compatible with CN.. 1204..

INSERTS DESCRIPTION

CNMG120412 - PER QP1025 standard carbide (with coating) turning inserts with four cutting edges

C - quadrilateral shape of turnining insert - rhombic (80°)

N - Insert without clearance under main cutting edge (0°)

M - Tolerances and dimensions of carbide turning insert

G - Hole through insert and double sided chipbreaker

12 - Length of cutting edge 12,9mm

04 - Height (thickness) of insert 4.76mm (from bottom of the insert to the top of the cutting edge)

12 - Nose radius R1.2

QP1025 - ISO Grade P20 - The type of carbide grade and the coating on inserts is originally intended for turning steel , steel alloys but it also performs when turning other alloys.

• Material: ISO grade carbide (tungsten):
  • For steel P10-30 (between wear resistance and shock resistance)(See ISO grade tables.)
  • CVD coating - thicker rough layer coating
• Feed speed in mm/rev - 0.1-0.3
• Cut depth - 1.0mm - 5.0mm
• Cuting speed - 260 - 400m/min
• Turning insert feature:
  • Strong cutting edges best reliability in hard cuting conditions and long endurance.
  • Geometry of CNMG turning insert is shaped for strong turning.
    
  • Inserts have secured and strongly supported cutting edge.
  • Recommended for different purposes and applications.
• Tips and Tricks:
  
  • For rough turning it is recommended  to use inserts with bigger nose radius (like R0.8 - R1.2), so wear, force and heat is distributed over larger surface - which makes inserts more durable.
    
  • For finishing it is recommended to use inserts with smaller nose radius (like R0.8 - R0.4), with that we reduce preasure on insert, increase cutting abilities, reduce vibration and we make better finishing surfaces.