Navojni sveder G3/8''-24 UNF (strojni - ravni) Mingren

Thread tap UNF 3/8 - 24 (fine UN thread)

Fine UN 60° pitch G 3/8

Pitch - 1,058mm/rotation - 24 threads per inch (25,4mm)

The tap is designed to make UNF 3/8 - 24 , into hole (nut)

Diameter over threads 9,525

Pre-Drilled hole diameter on nut 8,5mm

Length of flute 22mm

Overall length of the tool is 62mm

Diameter of the clamping part Ø7mm

Length of the clamping part L36mm

The size of the key adapter on taper ☐ 5,7mm

R - tool orientation is right

• Material:
  • High speed steel (longlife and durability)
    
• Colour:
  • Steel gray with laser mark

• Thread tap feature: 
  • Durability
  • High speed steel

• Tips and Tricks:
  • Use a dedicated thread-cutting oil or sulfur-based lubricant - it makes your tool last longer and workpiece better
    
  • Keep monitoring spindle load and chips - it will tell you a lot
    
  • Change thread taper on time